Troubleshooting guide

Step 6

To remove the stainless steel filter basket, lift up from

juicer bowl.

Caution: Sharp blades

OPERATION

Note: The juice extractor will not operate until the pulp

container is locked into position. See page 8.

Step 1

Wash your selection of fruit and vegetables for juicing.

Note: Most fruit and vegetables such as apples, carrots and

cucumbers will not need to be cut to size as they will fit into

the feed chute whole.

Step 2

Ensure that the Juicer is correctly assembled and

that the juice collector cup is placed under the spout

while juicing.

Step 3

Plug the power cord into a power outlet. For softer fruits

and vegetables such as melons, spinach, pears, etc., use

the low setting. For harder fruits and vegetables such as

carrots, beets, cabbage, etc., use the high setting.

Toggle to the low or to the high position depending on the

fruit or vegetable being processed. Toggle to the off position

when process is completed.

Step 4

With the motor running place food down the feed chute.

Using the food pusher, gently guide food down the chute.

To extract maximum juice always push the food pusher

down slowly. Make sure flat area of food pusher is aligned

to flat area of feed chute. The food pusher is marked with

an arrow for easy lineup.

26675 JEX-450A IB 23/6/08 11:59 AM Page 10