Specifications

2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
1.
READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor
base of blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning or removing contents from blender
jar. Never put hands into the blender jar, or insert fingers into
dispenser tap hole, or handle the blades with appliance plugged
in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to nearest Cuisinart service facility
for examination, repair, and/or mechanical or electrical
adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart may cause fire, electrical
shock, or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch hot
surfaces.
10. Keep hands and utensils out of jar while blending, to reduce the
risk of severe injury to persons or damage to blender itself. A
rubber or plastic spatula may be used but must be used only
when the blender is turned OFF.
11. When blender is in ON mode, and LED lights are flashing or
glowing, do not touch cutting assembly, interfere with blade
movement, or remove blender jar cover. Accidentally touching a
speed button may activate the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on base
unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid (center
piece of cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may result
in fire, electrical shock, or personal injury.
Regarding your cord set: A longer cord has been provided so that
you will have flexibility in positioning your Cuisinart
®
Smooth
Operator
®
Blender near an electrical outlet. Exercise care when
using the longer cord, to avoid entangling or tripping over the
cord. The longer cord should be arranged so that it will not drape
over the counter or tabletop, where it can be pulled on by children
or tripped over. Excess cord should be stored in the cord storage
area at the back of the blender base to avoid injury caused by the
longer cord.
19. Wash the blender jar, locking ring with cutting assembly,
dispenser tap, dispenser plug and cover before first use.
20.
WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK
OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE
DONE ONLY BY AUTHORIZED PERSONNEL.
21. Always operate the blender with the dispenser tap or dispenser
plug in place.
22. Never place blade assembly on base unless assembled to jar.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one prong is wider than the
other).
To reduce the risk of electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify the
plug in any way.