Recipe Booklet Reverse Side INSTRUCTION BOOKLET PowerBlend 600™ 7-Speed Electronic Blender SPB-10 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING. 2. To protect against the risk of electrical shock, do not put motor base of blender in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. Cuisinart does not recommend the use of this appliance by children. 4.
Maximum rating of 600 watts is based on the jar attachment that draws the greatest power. Other recommended attachments may draw significantly less power. INTRODUCTION 1. Place the gift box containing your Cuisinart® PowerBlend 600™ blender on a flat, sturdy surface before unpacking. One look at the touchpad on your new Cuisinart® PowerBlend 600™ blender and you'll know you've bought more than a blender.
6. Locking Ring (not shown) Is self-aligning so that the glass blender jar slides easily into position. 7. Heavy-Duty Motor Base Is so sturdy and stable, it will not “walk” on your counter – even during ice crushing! 8. 7-Speed Touchpad Control with Indicator Lights Is easy to use, read and clean. The red LED lights clearly indicate what blender speed you are using. 8a. Pulse at Any Speed Button Allows you to pulse at any speed so you can blend ingredients only as much as needed. 8b.
OPERATING INSTRUCTIONS 1. Place the motor base of your Cuisinart® PowerBlend 600™ Electronic Blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the assembly instructions. Once the jar is assembled and is in position on the motor base, plug the Cuisinart® PowerBlend 600™ Electronic Blender into an electrical outlet. 2. Add all necessary ingredients to the blender jar, and replace the cover.
deactivated and stopped at any speed by pushing the Off button. You will need to press the On button again to continue blending. 7. P ULSE MODE: While the blender is turned on, you can create a burst of power for quick, efficient blending, by activating the pulse function. To do so, first push the Pulse button, which will cause the pulse indicator light to flash. Next, push and release the desired speed button. Repeat as desired. You determine the duration of each pulse.
• Cut most foods into cubes approximately ½ inch (1.3 cm) to 1 inch (2.5 cm) to achieve a more uniform result. Cut all cheeses into pieces no larger than ½ inch (1.3 cm). • Don’t overload blender. If the motor stalls, turn the blender off immediately, unplug the unit, and remove a portion of the food, then continue. • U se the measured pour lid to measure liquid ingredients such as alcohol. Replace measured pour lid after ingredients have been added.
To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping and handling of the product. Please pay by check or money order (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions). NOTE: For added protection and secure handling of any Cuisinart® product that is being returned, we recommend you use a traceable, insured delivery service.