Specifications

Display Back-lit LCD display.
Program Key Depress to enter and move through the programming steps.
Regeneration Key Press and hold the key for three (3) seconds to initiate an immediate regeneration.
When pressed during programming the time of day, this key will allow the user to toggle between the
hours and minutes setting of timing program segments.
Information Key Each time depressed, the Information key will display statistical information such a flow rate, time of
day. Use with the Toggle Down key to display other statistical information.
Toggle Down Key In the programming mode this key will move the user through the programming function in a
descending mode. If depressed for greater than three seconds, the rate at which the display scrolls
through data will increase.
Toggle Up Key In the programming mode this key will move the user through the programming function in an
ascending mode. If depressed for greater than five seconds, the rate at which the display scrolls
through the data will increase.
This key will also allow the user to manually step through the cycles of regeneration.
Table 6
Setting Time Of Day
1. Press Program until 'tod' is displayed.
2. Use arrow keys to adjust minutes.
3. Press Regen once then adjust hours.
4. Continue to press Program to exit menu & save.
Program
Regen
Information
Press Regen once to begin regeneration tonight.
Or hold for immediate regeneration.
Display
Program Key
Toggle Down
Regeneration Key
Information Key
Toggle Up
16 Culligan
®
Iron-Cleer
®
Plus Water Filters