Specifications

Statistics 27
• Today’s Water Usage (standard information) - This display will only show if the flow
meter is attached to the control. The display will show the accumulated flow of water for
the current day. The value is to start totaling at 12:00 AM and reset to 0 at 11:59:59 PM.
The display will show the “TODAY’S”, “WATER USAGE” and “GALLONS” or “LITERS”
icons (depending on dip#7 setting) and the total days flow based on the “K” factor and
number of pulses received from the flow meter.
• Average Daily Water Usage (standard information) -
This display will only show if
the flow meter is attached to the control. The display will show a running 7-day average
of daily water usage. The display will show the “AVG DAILY”, “WATER USAGE” and
“GALLONS” or “LITERS” (depending on dip # 7 setting) icons and the averaged flow
value.
• Number of Regenerations in Last 14 Days
(service information) - This display will show the
number of regenerations that have occurred in the
last 14 days. The display will first show “14dAY”
for two seconds and then display the number of
regenerations that have occurred.
• Number of Days since Last Regeneration (service information) -
This display shows
the number of days that have elapsed since the last regeneration. The display will show
“DAYS XX” where XX is the number of days that have elapsed since the unit completed
its last regeneration.
• Total Number of Regenerations for Life of Unit
(service information) - This display will show the
total number of regenerations that have occurred
since installation. The display will show “totALR”
for two seconds and then display the total number
of regenerations.
OOOO 8 7