Specifications

Preparation

Preparation 3

Component Description

The Iron-Cleer

water filter is shipped from the factory in nine(9) cartons. Remove all components from their cartons and inspect

them before starting installation.

Control Valve Assembly - Regeneration control valve, small parts package contains installation hardware and consumer literature,

including the warranty policy.

Media Tank - Two (2) fiberglass tanks complete with fittings.

Media - One package of Birm filter media (10” filters), or two for 12” filters, one package G-50 and a package of Cullsan

underbedding.

Aeration Head - The aeration head incorporates the compressor and other miscellaneous components.

Pick-up Tube - This is the long tube which mates to the aeration head inside the tank.

Tools And Materials

All Installations

• Safety goggles

• Slotted screwdrivers, medium and large tip

• Phillips screwdrivers, small and medium tip

• Pliers, standard or locking groove

• Gauge Assembly (PN 00304450 or equivalent)

• Silicone lubricant (PN 00471507 or equivalent) - Do Not Use Petroleum-based Lubricants

• Lubricating swabs (PN 00591610, carton of 12)

• Thread sealing tape

• A bucket, preferably light-colored

• Towels

Special Tools

• Torch, solder and flux for sweat copper connections

• Use only lead-free solder and flux for all sweat – solder connections as required by state and federal codes.

• Threading tools, pipe wrenches and thread sealer for threaded connections

• Saw, solvent and cement for plastic pipe connections

• Snap-ring pliers, external, for three-valve bypass (see following section)

• For testing the compressor, a gauge (PN 00448621). Adapt to 1/4” tubing.

• Tank Filling Funnel

Materials

• Drain Tubing, 1/4” black polyethylene (PN 00303177), 3/8” black polyethylene (PN 01009819)

• Drain line, 1/2” (PN 00303082, gray, semi-flexible; or PN 00331946, black, semi-rigid; or equivalent)

• Pressure reducing valve (if pressure exceeds 60 psi [414 kPa], PN 00400900 or equivalent)

• Pipe and fittings suited to the type of installation

• Bleach, 5-1/4%, 1 gallon [3.8 liters]