Specifications

31
01021076
Set Clock Type (12 or 24)
CLOCK TYPE
>12 HR
The screen displays the clock type setting. Press to accept the informa-
tion displayed (and view the next setup screen), or press
to change
the setting.
Press
to change the clock type from 12-hour to 24-hour. Press
to accept the selected clock type and advance to the next setting, SET
HOUR.
Set Hour (12PM–11AM)
SET HOUR
>12AM
The screen displays the hour setting. Press to accept the information
displayed (and view the next setup screen), or press
to change the
setting.
Press
to change the hour (in this example, from 12PM to 10AM).
Press
to accept the selected hour and advance to the next setting, SET
MINUTES.
Set Minutes (0–60)
SET MINUTES
>01
The screen displays the minutes setting. Press to accept the informa-
tion displayed (and view the next setup screen), or press
to change
the setting.
Press
to change the minutes (in this example, from 0 to 20). Press
to accept the selected hour and advance to the next setting, UNIT TYPE.
Unit Type (Softener, Filter, or Resin + Carbon)
UNIT TYPE
>SOFTENER
The screen displays the unit type setting. Press to accept the default
setting (softener) and advance to the next setting, VALVE TYPE.
Valve Type (HE 1, HE 1.25, HE 1.5, HE 1 Twin, HE 1.5 Twin, 4-Cycle, 5-Cycle, or Plat Plus)
VALVE TYPE
>HE 1
The screen displays the valve type setting. Press to accept the default
setting (HE 1) and advance to the next setting, UNITS.
Units (US or Metric)
UNITS
>US
The screen displays the units of measure setting. Press to accept the
default setting (US) and advance to the next setting, INSTALL TYPE.
Install Type (Residential or Commercial)
INSTALL TYPE
>Residential
The screen displays the installation type setting. Keep this at the default,
Residential. Press
to view the next setting, BRINING TYPE.