Specifications

Settings 29
Fill the Salt Storage Container
Fill the salt storage container with water until the level reaches about 1 inch above the salt support plate. Pour
salt into the container. Fill with salt to within a few inches of the top.
Brine Valve “A” Dimension
The Culligan Medallist Series
®
unit contains a brine oat which can serve as a backup rell shutoff in the event
of a failure, such as a power outage when in the rell position. The oat level should be set based on the salt
dosage setting. Refer to gure 22.
• Remove nut retaining brine valve to brine chamber.
• Lift the brine valve from the brine chamber.
• Find the correct “A” dimension from Appendix A, Table 5.
• Set the distance from the top of the lter screen to the base of the oat accordingly. The slight difference in
height when the oat is pulled up or down is negligible.
• Re-install into brine chamber and replace nut.
“A” Dimension
Figure 22