Specifications

Service Check 39
Capacity Remaining (gal/ L)
This display will only show if the ow meter is attached to the control. The display
shows the gallons or liters of capacity remaining in the batch before regeneration
will be triggered. The display will show “GALr” (“Litr” for metric) for two seconds and
then display the remaining capacity. When reaching “0” the display will remain at
“0” and not show negative values.
This display shall never time out, as opposed to the rest of standard statistic
(10 minutes).
Number of Regenerations in Last 14 Days
This display will show the number of regenerations that have occurred in the last 14
days. The display will rst show “14dY” for two seconds and then display the number
of valid regenerations that have occurred.
Number of Days since Last Regeneration
This display shows the number of days that have elapsed since the last
regeneration. The display will show “dAYS” for two seconds and then the number of
days that have elapsed since the unit completed its last valid regeneration.
Total Number of Regenerations for Life of Unit
This display will show the total number of regenerations that have occurred since
installation. The display will show “totL” for two seconds and then display the total
number of valid regenerations for the life of the unit.
Statistical Function Timeout
If no key activity occurs for a period of 600 seconds (10 minutes) while in statistics
functions mode, the mode will time out and return to the time of day display. An
exception is that the ow rate and capacity remaining will not time out but will remain
displayed until a key is pressed. Pressing the “Status” key at any time will return he
unit back to the time display.