Operating instructions

PROGRAMMING 19
Exiting Program Mode
From Step 6 (or step 7 if it is active) press the “Status” key.
The display will go blank.
Press the “Status” key again to exit programming.
Note: The control will exit the programming mode if no key press activity takes place within one minute.
Locking the Programmed Menu
Press and hold the “+” key for 3 seconds while in the service mode.
The display will show the status of the lock feature. (“LoC” or “unL”)
Adjust with the “+” or “-“ key.
Press the “STATUS” key to return to the service mode.
Note: While the programmed menu is locked (“LoC”) all of the
programming menu items will display, however only the time of day
can be changed.
Note: If programming times out, values will not be saved. The “Status” key must be pressed to save values.
TABLE 5 - Suggested Brine Draw/Slow Rinse Times
Brine Draw/Slow Rinse Time (Minutes)
Salt Dosage 8" Tank 10" Tank
353—
455—
55740
65942
76244
86546
96848
10 71 50
11 74 52
12 76 53
13 78 55
14 80 56
15 82 58
16 — 59
17 — 61
18 — 62
19 — 64
20 — 65
21 — 67
22 — 68
23 — 70
24 — 71
Note: Values are for 50 psi pressure. Minutes should be adjusted for lower and higher pressures to
ensure that the brine is fully rinsed out.