Operating instructions

20 CULLIGAN MEDALLIST SERIES

™

Manual Cycling

The Culligan

microprocessor can be indexed through the various regeneration stages. For all steps, the cycle

numbers do not appear, or change, until the motor stops.

1. Press the status button to move past the programming steps

until the display is blank. From blank display press the “+”

key. An "H" will appear in the display. The control is in the

HOME position.

2. Press and hold the regen button. The 'REG' icon will blink, and

the motor will advance the control. A '1' will appear. The unit is

now in the BACKWASH position. The numbers to the right

indicates the time remaining for the cycle.

3. Press the “+” key. A '2' will appear in the display, along with

the cycle time remaining. The control is in the BRINE DRAW/

SLOW RINSE cycle.

4. Press “+” key. A '3' will appear in the display, along with the

cycle time remaining. The control is now in the FAST RINSE/

BRINE REFILL cycle.

5. Press the “+” key. An 'H' will appear in the display. The unit is

in the HOME position. The 'REG' enunciator is no longer

blinking.

6. Press the status key. Time-of-Day appears in the display.

Note: If the “+” key is pressed to cycle the value from position

“3” to “Home”, the # regen counters will not be updated.

H 00

REG

I I0

2 7 I

REG

3 08

REG

H 00

7:28

REG