Service manual
10 CULLIGAN MEDALLIST SERIES
™
FIG. 2
BRINE VALVE "A" DIMENSION
The brine valve contains a oat-actuated safety shut-off device to prevent overow of the brine tank in the unlikely
case of an electrical or mechanical failure during the brine tank rell cycle.
It is recommended that the brine valve oat be used as intended, that is, as a secondary, safety shut off. Remember,
the timer mechanism provides the primary rell shut-off. To use the oat as a safety shut-off, refer to Table 4 for
the salt dosage and brine tank size being used. The "A" dimension is the distance between the lter screen and the
bottom of the oat (Figure 2) when the oat stem is in its fully raised position; adjust the oat and rubber grommets
accordingly.