Cat. No. 01017584 Rev.
Thank You And welcome to your new world of better living with Culligan water. The Culligan Soft-Minder Twin™ Water Softeners are tested and certified by WQA according to WQA S100 for calcium and magnesium reduction (hardness). For installations in Massachusetts, the Commonwealth of Massachusetts Plumbing Code 248 CMR shall be adhered to. Consult your licensed plumber for installation of the system. This system and its installation must comply with state and local regulations.
Owners Guide & Installation Instruction Supplement Soft-Minder Twin ® Models From 2005 Table of Contents Page Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Salt Supply, Usage & Service . . . . . .
Specifications Twin Specifications SM-61 Model Control Valve SM-91 Model SM-121 Model SM-181 Model Reinforced Reinforced Reinforced Reinforced Thermoplastic Thermoplastic Thermoplastic Thermoplastic Overall Conditioner Height Media Tank Design Quadra-Hull or FRP Quadra-Hull or FRP Quadra-Hull or FRP Quadra-Hull or FRP Media Tank Dimensions (Dia x Ht) 9 x 48 in 10 x 54 in 12 x 52 in 14 x 65 in Salt Storage Tank Dimensions (Dia x Ht) 16 x 43 in 18 x 43 in 18 x 43 in 24 x 42 in Culle
Introduction IT’S ALL SO EASY, SO ECONOMICAL, SO EFFICIENT, SO ENJOYABLE! KIND TO SKIN AND COMPLEXION Soft water will help prevent red, itchy or dry skin because there are no hardness impurities to cause soreness, no soap curd to coat the skin. Shaving is easier, smoother - either with blade or electric shaver. BATHING AND SHOWERING You’ll use far less soap with conditioned water. Use your soap very sparingly - not as you did before soft water.
Introduction How Your Water Conditioner Works Why Water Gets Hard And How It’s Softened All of the fresh water in the world originally falls as rain, snow, or sleet. Surface water is drawn upward by the sun, forming clouds. Then, nearly pure and soft as it starts to fall, it begins to collect impurities as it passes through smog and dust-laden atmosphere. And as it seeps through soil and rocks it gathers hardness, rust, acid, unpleasant tastes and odors.
Introduction The Culligan Process Your Culligan water conditioner consists of three basic components, (A) the Control Valve, (B) the Mineral Tank, and (C) the Brine System. A. The exclusive Culligan control valve automatically performs a variety of tasks that are necessary for the proper operation of your water conditioner. These tasks, commonly referred to as cycles or operating positions, are: SERVICE, REGENERATION, and BRINE REFILL. 1.
Preparation Component Description The water conditioner is shipped from the factory in a minimum of four cartons. Remove all components from their cartons and inspect them before starting installation. Control Valve Assembly - Includes the Soft-Minder Twin Control. Small parts packages will contain additional installation hardware, and the conditioner Owner’s Guide.
Preparation Temperature - Do not install the unit where it might freeze, or next to a water heater or furnace or in direct sunlight. Outdoor installation is not recommended and voids the warranty. If installing in an outside location, you must take the steps necessary to assure the softener, installation plumbing, wiring, etc. are as well protected from the elements (sunlight, rain, wind, heat, cold), contamination, vandalism, etc. as when installed indoors.
Installation Use this installation supplement with the Fleck Service Manual and Timer Supplemental Service Manual. This addendum supplements the Fleck 9100 Service Manual and Timer Service Manual. TO HOSE BIBS TREATED WATER OUT DRAIN LINE HARD WATER IN AIR GAP HEATER BRINE TANK WATER METER OR PUMP SOFT-MINDER TWIN Figure 1 Placement • Set the media tanks on a solid, level surface that provides easy access to a water supply, drain system and electricity.
Installation Start-Up Place approximately 1" of water above the grid plate (if used) in your salt tank. Salt may be placed in the unit at this time. Place softener in a bypass position. Turn on the main water supply and check for any leaks. Open a cold water faucet near the softener and run a few minutes until the system is free of any foreign material (usually solder) that may have resulted from the installation. Plug unit into electrical outlet. Do not insert meter cable into the meter at this time.
Installation Timer Control Start-Up Procedures Display Figure 3 Timer Display In normal operation the Time Of Day display alternates with Volume Remaining and Tank in In Service displays ( 9000SE Timer only). As treated water is used, the Volume Remaining display counts down (in gallons) from a maximum value to zero or (----). Once this occurs a Regeneration cycle initiates immediately or delayed to the set Regeneration Time . Water flow through the valve is indicated by the flashing Flow Dot Indicator.
Installation Set Control Programming 1. Press and hold both the Set Up and Set Down buttons for 5 seconds. 2. Set the Treated Water Capacity. Using the Set Up or Set Down buttons, set the amount of treated water to flow through the unit before a Regeneration is required. 3. Press the Extra Regeneration button. 4. Set the Regeneration Time . Use the Set Up or Set Down buttons to set the desired time of day for Regeneration to occur. NOTE: This does not display if Regeneration occurs immediately. 5.
Installation Immediate Regeneration Valves With Days Between Regeneration Override Set When the valve reaches its set Days Since Regeneration Override value, a Regeneration cycle initiates immediately. This event occurs regardless of the Volume Remaining display reaching zero gallons. Delayed Regeneration Valves With Days Between Regeneration Override Set When the valve reaches its set Days Since Regeneration Override value a Regeneration cycle initiates at the preset Regeneration Time .
Installation Table 2 - Salt Dosage vs. Capacity vs. Timer Settings Unit SM-61 SM-91 SM-121 SM-181 Exchange Capacity @ Salt Refill Time Dosage Per Regeneration (Minutes) 13,760 gr @ 3.3 lb 4 27,848 gr @ 9.3 lb 6 32,932 gr @ 15.0 lb 10 21,193 gr @ 5 lb 4 42,890 gr @ 14 lb 9 50,732 gr @ 22.5 lb 15 28,173 gr @ 6.7 lb 4 57,020 gr @ 18.
Installation Sanitizing Procedure A water softener in daily use on a potable water supply generally requires no special attention other than keeping the salt tank filled. Occasionally, however, a unit may require sanitization under one of the following conditions: • At start-up time. • After standing idle for a week or more. • On private supplies, the appearance of off-tastes and odors, particularly if musty or "rotten egg" (caused by harmless sulfate-reducing bacteria).
Installation Before Leaving the Installation Site Sanitizing the softener. See sanitizing procedure on previous page. Ensure that the brine tank has water to the level of the float. Add water to the tank with a hose or put the unit into a full recharge so that the brine refill cycle will fill the tank with the proper amount of water. The water heater will hold hard water for several days. Advise the customer that the existing water volume in the tank will need to be used before the hot water is soft.
Salt Supply, Usage & Service Salt is the mineral used to “recharge” your water conditioner. A brine solution is automatically made up in the bottom of the salt storage container, the Cullex® resin beads in the mineral tank are flushed with the brine solution as a step in the recharging process. Your Culligan Water Conditioner has been carefully designed to get the greatest amount of softening capacity from the salt it uses. Here is some pertinent information about salt usage, types and service.
Care & Cleaning Care and Cleaning of Your Water Conditioner Following these simple precautions will help assure continued trouble-free service and keep your Culligan Water Conditioner looking like new for years. 1. Do not place heavy objects on top of the salt storage tank or timer cover. 2. Use only mild soap and warm water when cleaning the exterior of the conditioner. Never use harsh, abrasive cleaning compounds or those which contain acid, such as vinegar, bleach and similar products. 3.
Care & Cleaning To Clean Out the Salt Storage Tank A periodic clean-out of the Salt Storage Tank is necessary to keep your Culligan Water Conditioner at peak operating efficiency. Do it at least every 2 years when the salt supply is low. Follow these step-bystep procedures: Tools needed: • Scoop • Clean, bucket-size container • Phillips-head screwdriver • Garden hose • Household scrub brush or sponge 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
Service Check List Things to Check Before You Call For Service If you unexpectedly experience hard water, make these simple checks before calling your Culligan dealer. One of the following conditions may be the reason for your interruption of service. Important If any of the following conditions is found, the water conditioner should be manually recharged according to instructions on page 9 after you have corrected the problem. Power Supply Check your power supply cord.
Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty-five years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty-five years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty-five years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty-five years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
Records & Data Records and Data Important Data on Your Water Conditioner It is advisable to have the salesperson or installer fill in the information below for your future reference. If this has not been done, please ask for it, as it is necessary if you contact your dealer. IDENTIFICATION Model Name ________________________ Catalog No. ___________________________ Control Model No. ____________________ Control Serial No. ______________________ Date of Installation ___________________ Tank Serial No.
Warranty Culligan Limited Warranty Culligan Soft-Minder Twin™ Automatic Water Conditioners You have just purchased one of the finest water conditioners made.
Promise With Culligan You Get More Than a Quality Product You Get Your Water Expert, The Culligan Man We’re here to provide you with fast, dependable service, making sure any problems you have are taken care of. The Culligan Man has been around for over sixty years, delivery dependable service all along. That’s why people say “Hey, Culligan Man!®” Because we’re the water experts. And that’s who you want taking care of your water.
This Page Left Blank Intentionally 29
Parts List Control Valve 30 Culligan Soft-Minder® Twin
Parts List Item No. 1 2 3 4 6 8 9 10 11 12 Part No.
Parts List Power Head 32 Culligan Soft-Minder® Twin
Parts List Control Valve Parts List Item No. 8 10 11 12 17 18 19 21 23 25 26 27 28 30 29 34 36 39 * * * * Part No.
Parts List 9100 Second Tank Assembly Item No. 1 2 Part No. 01017576 01017577 01017765 Description plastic tube assembly, 9100, up to 10" tanks plastic tube assembly, 9100, up to 14" tanks second tank adapter assembly, 9100 Item No. 1 Part No. 01017767 Description Turbine meter assembly with clips and screws, less meter cable Meter Cable Qty. 1 1 1 Meter Assembly 2 34 01017768 Culligan Soft-Minder® Twin Qty.
Parts List Bypass Valve Item No. 1 Part No. 01017769 Description 1" Stainless Steel Bypass Valve NPT Qty. 1 Timer Assembly Item No. - Part No. 01017763 Description SE Timer Assembly Qty.
Parts List Tank Assembly Item 1 2 3 4 4 4 4 36 Culligan Soft-Minder® Twin Part Number 01016496 01016497 01017191 01017193 01017677 01017678 01016519 01016521 01009847 01011195 01009099 01016176 01014539 01014540 01016429 Description QH Tank Assembly, 9" w/o Fillport, Complete QH Tank Assembly, 10" w/o Fillport, Complete QH Tank Assembly, 12" w/o Fillport, Complete, Less Media QH Tank Assembly, 14" w/o Fillport, Complete, Less Media QH Tank Replacement, 9", w/o Fillport, Empty QH Tank Replacement, 10",
Parts List Brine Tank Item — 1 2 * Part Number 00-4418-87 00-3039-80 00-3039-75 00-3044-39 Description Brine System, 375 lb. Replacement Cover, 375 lb. (170 kg) Tank Only, 375 lb. (170 kg) Salt Plate, Plastic, 375 lb.
Parts List Brine Valve - 9” and 10” Tanks Item — — 1 2 3 ‡4 ‡5 6 Part Number 00-4418-88 00-4011-41 00-3031-93 00-3031-92 00-4407-96 00-3084-07 00-4016-22 00-3400-14 7 ‡8 9 00-4407-95 00-3325-28 00-2234-35 10 11 12 13 14 ‡15 16 17 ‡18 19 00-3047-03 00-3047-18 00-4448-73 00-3320-72 00-4446-64 00-4444-96 00-4473-92 00-4477-81 00-3048-04 00-5418-21 00-5418-34 20 00-3045-37 00-4413-92 21 00-3046-06 * 00-4463-88 * 00-4463-89 * Not Illustrated ‡ Recommended Spare Parts 38 Culligan Soft-Minder® Twin Des
Parts List Brine System - Safety Valve 40-GALLON TANK (375 lbs. capacity) Item 1 2/3 4 5 6 7 8 * * Part No. 01-0019-09 00-3039-80 00-3044-39 00-4471-08 00-4463-88 00-3046-06 00-3042-93 00-3045-37 00-9018-00 Description Tank System Complete 40 gallon Cover, PP Plate, Salt, PE, w/Supports Tank, PE Screw, SS, #10-32 x 0.625" Cap Brine Safety Valve Brine Valve Chamber Tubing, Brine Line 1/2" O.D. x 3/8" I.D.
Parts List Brine Valve - 12” and 14” Tanks Item 1 2 5 6 7 7a 7b 8 9 10 11 12 13 14 15 16 17 18 19 20 * Part Number 00-3042-93 00-3321-25 00-4415-93 00-3321-74 00-3048-05 00-5418-22 00-4405-16 00-4404-02 00-2234-35 00-3400-14 P0-3047-03 00-3323-49 00-4448-73 00-3320-72 00-4446-64 P0-4444-96 P0-4473-92 P0-4477-81 00-4035-66 00-5418-21 00-3321-74 00-9018-00 Description Brine Valve Complete Cap, Refill Quad-Ring, Buna-N, 1.25" x 1.375" Restrictor, Refill, 0.8 gpm (12” & 14” Tanks) Gasket, Buna-N, 0.682" x 0.
This page contains materials and DCO information.
