User manual

12 PNEG-876 APP Series Fans
6. Wiring
Electrical Wiring
All wiring should be installed in accordance with National, State and Local electrical codes. Fans used to
ventilate livestock buildings or other rooms where continuous air movement is essential should be
connected to individual electrical circuits, with a minimum of two (2) circuits per room. We strongly
recommend the installation of supplementary natural ventilation as well as a back-up thermostat and an
alarm system on at least one cooling stage.
For electrical connection requirements, refer to Figure 6A on motor nameplate and to information enclosed
with the “AVS” fan control to be used.
Figure 6A
Direct Drive Wirings
Figure 6B
To reverse, interchange Red and Black leads.