User manual

6. Wiring
PNEG-876 APP Series Fans 13
Figure 6C
Motor overload protection should be provided for each fan. A circuit breaker switch or slow blow motor
type fuses must be used.
NOTE: A safety cut-off switch should be located adjacent to each fan, such as “AP” #’s:
E100-A1063 - 2-1/2 Amp
E100-A1064 - 5.0 Amp
E100-A1065 - 8.0 Amp
E100-A1066 - 15.0 Amp
Figure 6D
Back-up thermostats such as the TH-1, should always be used in conjunction with the control system.
These should be placed on a separate circuit to give the animals ventilation in the event that the
controller fails.