Product Manual

12
Periodic Maintenance
Periodic maintenance is essential for top perfor-
mance and long genset life. Use Table 3 as a guide
for normal periodic maintenance. In hot and dusty
environments some maintenance procedures
should be performed more frequently, as indicated
by the footnotes in the table. Keeping a log of main-
tenance performed and hours run (Page 34) will
help you keep genset maintenance regular and pro-
vide a basis for supporting warranty claims.
Maintenance, replacement or repair of emission
control devices and systems may be performed by
any engine repair establishment or individual. How-
ever, warranty work must be completed by an au-
thorized Onan dealer.
TABLE 3. PERIODIC MAINTENANCE SCHEDULE
MAINTENANCE PROCEDURE
MAINTENANCE FREQUENCY
Every
Day
After First
50 Hours
Every
Month
Every
150
Hours
Every
500
Hours
Every
1000
Hours
P
a
g
e
General Inspection X 13
Check Engine Oil Level X 14
Check Engine Coolant Level X 19
Clean and Check Battery X
3
16
Change Engine Oil and Filter X
1
X
2, 3, 4
15
Clean Spark Arrestor X
4
17
Replace Engine Air Filter X
2, 4
16
Replace Fuel Filter X 18
Check Coolant Anti-freeze Protection X 19
Flush Coolant System X
5
19
Replace Coolant Pressure Cap X
5
19
Replace Engine V-belt X
6,7
−
Clean Crankcase Breather X
6,7
−
Replace Coolant Hoses and Thermostat X
6, 7
−
1 − As a part of engine break-in, change the engine oil after the first 50 hours of operation.
2 − Perform more often when operating in dusty conditions.
3 − Perform more often when operating in hot weather.
4 − Perform at least once a year.
5 − Perform at least once every two years.
6 − Perform at least once every five years.
7 − Must be performed by a qualified mechanic (authorized Onan dealer).