Install Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Precautions
- 1.4 Generator Set Voltage Is Deadly
- 1.5 Engine Exhaust Is Deadly
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Moving Parts Can Cause Severe Personal Injury or Death
- 1.9 The Hazards of Carbon Monoxide
- 2. Introduction
- 3. Pre-Installation Considerations
- 4. Installation
- 5. Startup and Configuration
- Appendix A. Fuel Line Selection
- Appendix B. Outline and System Drawings
- Appendix C. Seismic Requirements
4. Installation2-2016
45A045R241 (Issue 7) Copyright © 2016 Cummins Inc.
Install the transfer switch in accordance with the RA Series Transfer Switch
Owner Manual. The following image shows the location of the Cummins RA
Series Transfer Switch customer connections.
NOTICE
Class 1 wiring methods should be used for connecting the generator
set and transfer switch signal wiring.
FIGURE 13. RA SERIES TRANSFER SWITCH DC CONNECTIONS LOCATION