Install Manual

Appendix A. Fuel Line Selection2-2016
69A045R241 (Issue 7) Copyright © 2016 Cummins Inc.
A.1 Gas Pipe Sizing
NOTICE
The following tables in this section are reprinted with permission
from NFPA 54-2015, National Fuel Gas Code, Copyright © 2014,
National Fire Protection Association.
• Natural Gas Schedule 40 Metallic Pipe Sizing
• Natural Gas Semirigid Copper Tubing Sizing
• Propane Vapor Schedule 40 Iron Pipe Sizing
• Propane Vapor Semirigid Copper Tubing Sizing
• Propane Schedule 40 Iron Pipe Sizing, Liquid Withdrawal
(Maximum Capacity of Pipe in Cubic Feet of Gas per Hour)
This reprinted material is not the complete and official position of
the NFPA on the referenced subject, which is represented only by
the standard in its entirety.
Sizing of gas piping for proper fuel delivery, both flow and pressure, can
become quite complex. A simplified method is to convert all fittings,
valves, etc. to equivalent lengths of pipe in the diameter(s) being
considered. The total equivalent length can then be related to flow
capacity. Equivalent lengths of pipe fittings and valves can be found in the
table below.
TABLE 18. EQUIVALENT LENGTHS OF PIPE FITTINGS AND VALVES IN FEET
(METERS)
TYPE OF
FITTING
NOMINAL INCH (MILLIMETER) PIPE SIZE
1/2
(15)
3/4
(20)
1
(25)
1-1/4
(32)
1-1/2
(40)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
90° Std. Elbow or
Tee Reduced ½.
1.6
(0.5)
2.0
(0.6)
2.6
(0.8)
3.3
(1.0)
4.0
(1.2)
5.0
(1.5)
6.0
(1.8)
7.5
(2.3)
10.0
(3.1)
90° Long Radius
Elbow or Straight
Run Tee
1.0
(0.3)
1.4
(0.4)
1.7
(0.5)
2.3
(0.7)
2.6
(0.8)
3.3
(1.0)
4.1
(1.3)
5.0
(1.5)
6.7
(2.0)
45° Elbow 0.8
(0.2)
0.9
(0.3)
1.3
(0.4)
1.7
(0.5)
2.1
(0.6)
2.6
(0.8)
3.2
(1.0)
4.0
(1.2)
5.2
(1.6)
180° Std. Bend 2.5
(0.8)
3.2
(1.0)
4.1
(1.2)
5.6
(1.7)
6.3
(1.9)
8.2
(2.5)
10.0
(3.1)
12.0
(3.7)
17.0
(5.2)
TEE, Side Inlet or
Outlet
3.0
(0.9)
4.0
(1.2)
5.0
(1.5)
7.0
(2.1)
8.0
(2.4)
10.0
(3.0)
12.0
(3.7)
15.0
(4.6)
21.0
(6.4)