Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Safety Precautions
- 1.4 Generator Set Safety Code
- 1.5 Batteries Can Explode
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation - PowerCommand 1.1
- 5. Maintenance
- 6. Troubleshooting
- 6.1 Engine Is Difficult to Start or Does Not Start
- 6.2 Code 143 - Engine Oil Pressure Low (Warning)
- 6.3 Code 151 - Engine Coolant Temperature High (Shutdown)
- 6.4 Code 155 - Intake Manifold Temperature High (Shutdown)
- 6.5 Code 197 - Coolant Level Low (Warning)
- 6.6 Code 415 - Engine Oil Pressure Low (Shutdown)
- 6.7 Code 421 - Engine Oil Temperature High (Warning)
- 6.8 Code 441 - Battery Voltage Low (Warning)
- 6.9 Code 488 - Intake Manifold Temperature High (Warning)
- 6.10 Code 1438 - Fail to Crank (Shutdown)
- 6.11 Code 1472 - High AC Current (Shutdown)
- 6.12 Code 5134 - Unknown Shutdown at Idle
- 7. Manufacturing Facilities
2. Introduction2-2016
15A045R242 (Issue 7) Copyright © 2016 Cummins Inc.
ABBR. DESCRIPTION ABBR. DESCRIPTION
LBNG Lean-burn Natural Gas UL Underwriters Laboratories
LCD Liquid Crystal Display UPS Uninterruptible Power
Supply
2.4 Related Literature
The literature provided with the generator set is as follows:
• Installation Manual (A045R241)
• Operator Manual (A045R242)
CAUTION
A generator set must be operated and maintained properly if you are to
expect safe and reliable operation. The Operator Manual includes a
maintenance schedule and a troubleshooting guide.
The Health and Safety Manual must be read in conjunction with this manual
for the safe operation of the generator set:
• Health and Safety Manual (0908-0110)
• Warranty Statement (A040H442)
• Emissions Component Defect Warranty Statement (A028X278)
The relevant manuals appropriate to your generator set are also available. The
documents below are in English:
• Service Manual (A045R243)
• Parts Manual (A046Z094)
• EControls, Inc. Service Manual (A035C596)
• Global Control Platform (GCP) Engine Display Interface Software (EDIS)
Training Manual (A035C608)
• RA Series Transfer Switch Owner Manual (A046S594) (if applicable)
• PowerCommand® 1302 Controller Owner's Manual (900-0661)
• Standard Repair Times (SRT) Manual (A046Z674)
• Application Manual T-030 - for application information (A040S369)
• Service Tool Manual (A043D529)