Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Safety Precautions
- 1.4 Generator Set Safety Code
- 1.5 Batteries Can Explode
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation - PowerCommand 1.1
- 5. Maintenance
- 6. Troubleshooting
- 6.1 Engine Is Difficult to Start or Does Not Start
- 6.2 Code 143 - Engine Oil Pressure Low (Warning)
- 6.3 Code 151 - Engine Coolant Temperature High (Shutdown)
- 6.4 Code 155 - Intake Manifold Temperature High (Shutdown)
- 6.5 Code 197 - Coolant Level Low (Warning)
- 6.6 Code 415 - Engine Oil Pressure Low (Shutdown)
- 6.7 Code 421 - Engine Oil Temperature High (Warning)
- 6.8 Code 441 - Battery Voltage Low (Warning)
- 6.9 Code 488 - Intake Manifold Temperature High (Warning)
- 6.10 Code 1438 - Fail to Crank (Shutdown)
- 6.11 Code 1472 - High AC Current (Shutdown)
- 6.12 Code 5134 - Unknown Shutdown at Idle
- 7. Manufacturing Facilities
5. Maintenance2-2016
65A045R242 (Issue 7) Copyright © 2016 Cummins Inc.
Maintenance
Item
Daily or
After 24
Hours
Weekly or
After 50
Hours
100
Hours
12 Months or
After 200
Hours
1
2 Years
1
4000 hours
Check drive
belt, condition
and tension:
Visually
check belt for
evidence of
wear or
slippage.
■
Check
coolant lines
and radiator
hoses for
leaks, wear,
and cracks:
Visually
check for
leaks, worn
or damaged
hoses.
■ ■
Check
radiator air
flow: Visually
inspect the
radiator
through the
guarding for
blockage,
build-up of
debris, signs
of wear or
damage.
■
Verify that the
coolant
heater has
power and is
running
(where fitted).
Check for
evidence of
leaks.
Remove any
corrosion
from fittings.
■