Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Safety Precautions
- 1.4 Generator Set Safety Code
- 1.5 Batteries Can Explode
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation - PowerCommand 1.1
- 5. Maintenance
- 6. Troubleshooting
- 6.1 Engine Is Difficult to Start or Does Not Start
- 6.2 Code 143 - Engine Oil Pressure Low (Warning)
- 6.3 Code 151 - Engine Coolant Temperature High (Shutdown)
- 6.4 Code 155 - Intake Manifold Temperature High (Shutdown)
- 6.5 Code 197 - Coolant Level Low (Warning)
- 6.6 Code 415 - Engine Oil Pressure Low (Shutdown)
- 6.7 Code 421 - Engine Oil Temperature High (Warning)
- 6.8 Code 441 - Battery Voltage Low (Warning)
- 6.9 Code 488 - Intake Manifold Temperature High (Warning)
- 6.10 Code 1438 - Fail to Crank (Shutdown)
- 6.11 Code 1472 - High AC Current (Shutdown)
- 6.12 Code 5134 - Unknown Shutdown at Idle
- 7. Manufacturing Facilities
5. Maintenance2-2016
67A045R242 (Issue 7) Copyright © 2016 Cummins Inc.
Maintenance
Item
Daily or
After 24
Hours
Weekly or
After 50
Hours
100
Hours
12 Months or
After 200
Hours
1
2 Years
1
4000 hours
Check
generator set
enclosure:
Visually
check
enclosure,
walk around
inspection of
generator set.
Make sure no
inlets/outlets
are
covered/restri
cted, service
access doors
are
operational
and safety
systems are
in place and
operational.
■
Check
operation of
Emergency
Stop Button
(where fitted):
With the
generator set
running,
press the
Emergency
Stop button.
Check all
systems,
before
resetting the
fault.
■
Replace
engine oil
and filters.
Refer to the
procedure in
the Engine
Oil section.
■
2
■
2