Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Safety Precautions
- 1.4 Generator Set Safety Code
- 1.5 Batteries Can Explode
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation - PowerCommand 1.1
- 5. Maintenance
- 6. Troubleshooting
- 6.1 Engine Is Difficult to Start or Does Not Start
- 6.2 Code 143 - Engine Oil Pressure Low (Warning)
- 6.3 Code 151 - Engine Coolant Temperature High (Shutdown)
- 6.4 Code 155 - Intake Manifold Temperature High (Shutdown)
- 6.5 Code 197 - Coolant Level Low (Warning)
- 6.6 Code 415 - Engine Oil Pressure Low (Shutdown)
- 6.7 Code 421 - Engine Oil Temperature High (Warning)
- 6.8 Code 441 - Battery Voltage Low (Warning)
- 6.9 Code 488 - Intake Manifold Temperature High (Warning)
- 6.10 Code 1438 - Fail to Crank (Shutdown)
- 6.11 Code 1472 - High AC Current (Shutdown)
- 6.12 Code 5134 - Unknown Shutdown at Idle
- 7. Manufacturing Facilities
5. Maintenance 2-2016
68 A045R242 (Issue 7)Copyright © 2016 Cummins Inc.
Maintenance
Item
Daily or
After 24
Hours
Weekly or
After 50
Hours
100
Hours
12 Months or
After 200
Hours
1
2 Years
1
4000 hours
Check
battery:
Check
connections
to verify that
they are
secure.
■ ■
Replace air
cleaner.
■
Clean
radiator core.
■
3
Check charge
air cooler for
damage and
debris (where
fitted).
■
Check water
pump for
leaks. Check
weep holes
for evidence
of leaks.
Replace if
leaking.
■
Check engine
ground.
Clean as
necessary.
■
Check engine
mounts
general
condition and
for signs of
excessive
wear.
■
Check
starting motor
for general
condition,
wiring
connections.
■