Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 General Safety Precautions
- 1.4 Generator Set Safety Code
- 1.5 Batteries Can Explode
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation - PowerCommand 1.1
- 5. Maintenance
- 6. Troubleshooting
- 6.1 Engine Is Difficult to Start or Does Not Start
- 6.2 Code 143 - Engine Oil Pressure Low (Warning)
- 6.3 Code 151 - Engine Coolant Temperature High (Shutdown)
- 6.4 Code 155 - Intake Manifold Temperature High (Shutdown)
- 6.5 Code 197 - Coolant Level Low (Warning)
- 6.6 Code 415 - Engine Oil Pressure Low (Shutdown)
- 6.7 Code 421 - Engine Oil Temperature High (Warning)
- 6.8 Code 441 - Battery Voltage Low (Warning)
- 6.9 Code 488 - Intake Manifold Temperature High (Warning)
- 6.10 Code 1438 - Fail to Crank (Shutdown)
- 6.11 Code 1472 - High AC Current (Shutdown)
- 6.12 Code 5134 - Unknown Shutdown at Idle
- 7. Manufacturing Facilities
5. Maintenance 2-2016
78 A045R242 (Issue 7)Copyright © 2016 Cummins Inc.
Heavy Duty Air Cleaner
Heavy Duty Air Cleaner Element Removal
No. Description No. Description
1 Housing 3 Latch
2 Air Filter Element 4 End Cover
FIGURE 42. HEAVY DUTY AIR CLEANER
NOTICE
Cummins Inc. does not recommend cleaning paper-type air cleaner
elements.
1. Before disassembly, wipe dirt from the cover and the upper portion of the
air cleaner.
2. Lift tab (3) and turn end cover (4) counterclockwise.
3. Pull the end cover (4) away from the housing (1).
4. Remove the air filter element (2) from the housing (1).