Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Batteries Can Explode
- 1.5 Moving Parts Can Cause Severe Personal Injury or Death
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Manufacturing Facilities
- 4. Control System
- 5. Operation - PowerCommand 1.1
- 6. Maintenance
- 7. Troubleshooting
- 7.2 Engine Is Difficult to Start or Does Not Start
- 7.3 Code 143 - Engine Oil Pressure Low (Warning)
- 7.4 Code 151 - Engine Coolant Temperature High (Shutdown)
- 7.5 Code 155 - Intake Manifold Temperature High (Shutdown)
- 7.6 Code 197 - Coolant Level Low (Warning)
- 7.7 Code 415 - Engine Oil Pressure Low (Shutdown)
- 7.8 Code 441 - Battery Voltage Low (Warning)
- 7.9 Code 488 - Intake Manifold Temperature High (Warning)
- 7.10 Code 1438 - Fail to Crank (Shutdown)
- 7.11 Code 1472 - High AC Current (Shutdown)
- 7.12 Code 5134 - Unknown Shutdown at Idle
9-2015 6. Maintenance
TABLE 17. PERIODIC MAINTENANCE SCHEDULE
After Every After Every 12 Months or 2 Years or
24 Hours 50 Hours After 250 After 500
of Run of Run Hours
2
Hours
2
Maintenance Items Time
1
Time
Check air cleaner restriction ■
indicator (where fitted): If the
indicator shows red, replace air
cleaner element and reset the
indicator.
Check air intake system for ■
leaks: Visually inspect for signs
of wear or damage. Check
audibly when the generator set
is running. Replace worn or
damaged components.
Check coolant level of radiator: ■
If low, top up to coolant system
specifications level, with
Cummins recommended coolant
mix.
Check cooling fan blades: ■
Visually inspect the blades
through the guarding for signs
of wear or damage. To replace,
contact your authorized
distributor.
Checking drive belt condition ■
and tension: Visually check belt
for evidence of wear or
slippage. To replace, contact
your authorized distributor.
Check radiator airflow: Visually ■
inspect the radiator through the
guarding for blockage, debris or
signs of wear or damage. To
clean or replace, contact your
authorized distributor.
Check fuel lines and hoses: ■
Visually check for leaks, worn or
damaged hoses. To replace,
contact your authorized
distributor.
A051X877 (Issue 3) 67










