Product Manual
Table Of Contents
- Table of Contents
- 1. Important Safety Instructions
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Batteries Can Explode
- 1.5 Moving Parts Can Cause Severe Personal Injury or Death
- 1.6 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.7 Fuel and Fumes Are Flammable
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Manufacturing Facilities
- 4. Control System
- 5. Operation - PowerCommand 1.1
- 6. Maintenance
- 7. Troubleshooting
- 7.2 Engine Is Difficult to Start or Does Not Start
- 7.3 Code 143 - Engine Oil Pressure Low (Warning)
- 7.4 Code 151 - Engine Coolant Temperature High (Shutdown)
- 7.5 Code 155 - Intake Manifold Temperature High (Shutdown)
- 7.6 Code 197 - Coolant Level Low (Warning)
- 7.7 Code 415 - Engine Oil Pressure Low (Shutdown)
- 7.8 Code 441 - Battery Voltage Low (Warning)
- 7.9 Code 488 - Intake Manifold Temperature High (Warning)
- 7.10 Code 1438 - Fail to Crank (Shutdown)
- 7.11 Code 1472 - High AC Current (Shutdown)
- 7.12 Code 5134 - Unknown Shutdown at Idle
9-2015 4. Control System
Key/Symbol Action
- Decreases value of the highlighted editable field.
+ Increases value of highlighted editable field.
Standard LED Indicators (HMI211)
The operator panel has six LED indicators. Colors, flashing frequency, and
conditions to turn them on/off/blink are included in the table below.
TABLE 13. LED INDICATORS
LED Color Action
Not in Auto Red Indicates the generator set is in Manual or Off Mode.
Shutdown Red Indicates a Shutdown Fault has occurred.
Warning Yellow Indicates a Warning Fault has occurred.
Remote Green Indicates that the generator set has received a Remote Start
Start Command.
Auto Green Indicates that the generator set is in Auto Mode. The generator starts
when it receives a Remote Start Command.
Manual Run Green Indicates that the generator set has received a Manual Run
Command.
In-Home Operator Panel (Accessory)
The in-home operator panel is an optional display that may be purchased. This
panel is intended to serve as a convenience option to the standard operator panel
mounted on the generator set.
A051X877 (Issue 3) 27