Spec Sheet

©2019 Cummins Inc. | NAS-6310 (A058X610) (12/19)
power.cummins.com
Specification Sheet
Quiet Connect
TM
Series
RS150
Features and Benefits
Robust product design and testing - The
generator is designed to operate under
extreme environmental conditions including
cold weather starts at as low as -40° F. The
generator is tested and certified per the latest
EPA, UL and IBC Seismic standards and is
capable of meeting NFPA110 requirements
when equipped with the necessary
accessories and properly installed.
Flexible exercise mode - The innovative,
flexible exercise mode enables the generator
to exercise at a time, frequency and duration
that suits the customer's preference - as little
as 2 minutes every 6 months - reducing
unnecessary fuel consumption, emissions
and noise.
Advanced enclosure design - The
aesthetically appealing enclosure
incorporates special designs that deliver
the quietest generator of its kind. Aluminum
material plus durable powder coat paint
provides the best anti-corrosion
performance. The generator set enclosure
has been evaluated to withstand 180 MPH
wind loads in accordance with ASCE7-10.
The design has hinged doors to provide
easy access for service and maintenance
Self-diagnostics and easy service - The
generator is equipped with Cummins
PowerCommand® electronic control to
provide industry-leading self-diagnostic
capabilities. In addition, critical components
of the generator are designed to ensure
service and preventive maintenance can be
completed in a short period of time.
Weight, Size and Sound Level
Weight:
3915 lbs. (1776 kgs)
2
Size:
Length 143.0 in (3621 mm), width 40.0 in (1016 mm), height 72.0 in (1836 mm)
Sound: 71.3 dB(A) at 23 ft. (7 m) with sound level 2 enclosure
Series Model Phase Voltage (V)
Frequency
(Hz)
Rated amp
1
(NG / LPV)
Circuit Breaker
(Amps)
RS150 C150N6
1 120 / 240 60 625 / 625 600
3 120 / 208 60 520.3 / 520.3 600
3 277 / 480 60 225.3 / 225.3 250
3 120 / 240 60 450.9 / 450.9 600
1
Derating guidelines: Engine power available up to 775 m (2540 ft.) and ambient temperatures up to 40° C (104° F).
Above these conditions, derate at 4.25% per 300 m (985 ft.) and 2% per 10° C (18° F).
2
Weight above is average. Actual weight varies with product configuration