Product Manual

2. Introduction 3-2016

2.6.1 Application and Installation

Installations must be carefully planned and correctly installed for proper operation. This involves two

essential elements: application and installation.

Application refers to the design of the complete standby power system that usually includes power

distribution equipment, transfer switches, ventilation equipment, mounting pads, cooling systems, exhaust

systems, and fuel systems. Each component must be correctly designed so the complete system functions

as intended. Application and design is an engineering function generally done by specifying engineers or

other trained specialists. Specifying engineers are responsible for the design of the complete standby

system and for selecting the materials and products required.

Installation refers to the actual set-up and assembly of the standby power system. The installers set up

and connect the various components of the system as specified in the system design plan. The complexity

of the standby system normally requires the special skills of qualified electricians, plumbers, sheet metal

workers, and etc. to complete the various segments of the installation. This is necessary so all

components are assembled using standard methods and practices.

2.6.2 Safety Considerations

The transfer switch has been carefully designed to provide safe and efficient service when properly

installed, maintained, and operated. However, the overall safety and reliability of the complete system

depends on many factors outside the control of the manufacturer. To avoid possible safety hazards, make

all mechanical and electrical connections to the transfer switch exactly as specified in this manual. All

systems external to the transfer switch must comply with all applicable codes. Make certain all required

inspections and tests have been completed and all code requirements have been satisfied before

certifying the installation is complete and ready for service.

Verify that both power source voltages match the nameplate rating prior to installation.