Installation Guide

1-2014 3. Step-By-Step Outline of Installation
• RSS 200-6635
• UL 1008 listed, Service Entrance Rated (without controller):
• RSS 100-6868
• RSS 200-6869
NOTICE
If the transfer switch is connected for full load coverage which exceeds the generator
set rating, it may be necessary to shed large loads such as air conditioners.
NOTICE
• The RSS 100 transfer switch models can be connected for full or partial load coverage
equal to the capacity of the generator set.
• The RSS 200 transfer switch models can be connected for full load coverage greater than
the capacity of the generator set.
TABLE 15. TRANSFER SWITCH CONNECTION VS. LOAD COVERAGE
Transfer Switch Model Connection Capabilities
Full Load Full or Partial Load
(Greater Than Capacity of Genset) (Equal to Capacity of Genset)
RSS 100-6634 X
RSS 200-6635 X
RSS 100-6868 X
RSS 200-6869 X
NOTICE
Model RSS 100-6634 and RSS 200-6635 transfer switches do not incorporate a utility circuit
breaker and therefore must be connected through a Service Entrance Utility Panel incorporating
the utility circuit breaker.
Perform Generator Set Configuration when ready to start up the generator set.
A029V088 (Issue 16) 13