Installation Guide

5. Optional Internet/Email Interface Setup 1-2014
NOTICE
Acquiring a static IP may incur additional service charges from your ISP.
2. Use the provided static IP address to access the generator set webpage from any location
with Internet access.
5.8 Dynamic IP Monitoring
NOTICE
If a static IP address has been authorized from your ISP, the following steps are not
required. Some services may require software to be installed on a home computer.
1. Determine the home network's public/external IP address using an online tool (such as,
www.whatismyip.com).
2. Locate a dynamic IP host online and register for services.
NOTICE
Online dynamic hosting service can often be provided at no cost.
3. Configure the modem/router to update the dynamic IP host each time its external/public IP
address changes.
NOTICE
Instructions for completing the above step should be provided by the dynamic IP
monitoring host and the router user manual.
4. Use the URL provided by the dynamic IP host service to access the generator set webpage
from any location with Internet access.
5.9 Help Hotline
1-800-888-6626 option 1
Technical support for setup and troubleshooting of the hardware used for in-home network
access to the generator set is available through the selling Cummins Power Generation
dealer/distributor.
The owner may be required to contact their ISP and/or email provider for technical support of
the e-mail notification feature setup and troubleshooting.
Due to the variations in network equipment, network configurations and ISPs, the owner is
responsible for acquiring the needed support/service from a qualified network specialist to
properly and securely set up the owner's network for remote monitoring of the generator set.
52 A029V088 (Issue 16)