Installation Guide

1-2014 7. Startup and Configuration
FIGURE 60. TRANSFER SWITCH ADJUSTMENTS
7.7 Generator Adjustments
7.7.1 To Adjust the Output Voltage
Use the following procedure:
1. Connect an accurate AC volt meter across L1 and L2 while the generator set is running.
2. With Output Volts selected on the Adjustments Menu screen, press the up or down arrow
button to adjust the voltage to the desired setting
3. The control allows an adjustment of 240 VAC ± 7% (17 VAC).
4. Press the BACK button to save the settings and return to the home screen.
A029V088 (Issue 16) 81