Use and Care Manual

3. Operation 1-2014
3.2 In-Home Operator Panel
The operator panel must be hard-wired to the generator set in order for the generator system to
operate.
NOTICE
The in-home operator panel and Internet/Email interface can be used simultaneously
The operator panel consists of two UTILITY status lamps, three GENERATOR status lamps,
three action buttons and an LCD display screen with four navigation buttons.
No. Description
1 Back Button - When navigating through the LCD menus, press this button to return to the main operating
screen.
2 Standby On/Off Button - See the To Enable/Disable Standby section of this manual.
3 Start Stop Button - See the To Manually Start/Stop Generator Set section of this manual.
4 Navigation Buttons - The function of these buttons change as different screens appear.
FIGURE 3. IN-HOME OPERATOR PANEL
3.2.1 BACK Button
When navigating through the LCD menus, press the BACK button to return to the main
operating screen.
3.2.2 START STOP Button
See To Manually Start/Stop Generator Set.
3.2.3 Standby ON/OFF Button
See To Enable/Disable Standby.
12 A029V089 (Issue 9)