Use and Care Manual

3. Operation 1-2014
FIGURE 7. LOAD MANAGEMENT TIMING DIAGRAM
3.3.1 Normal Operation: Utility Power Available and Connected
As long as utility power is available and connected, both of the green UTILITY lamps
(PRESENT and CONNECTED) will stay on and the LCD screen will indicate “Genset Stopped".
If the red GENERATOR STANDBY OFF light is on, the generator set will not start up
automatically if utility power is interrupted. See the To Enable/Disable Standby section of this
manual to enable STANDBY so that the generator set will automatically supply power if utility
power is interrupted.
16 A029V089 (Issue 9)