Use and Care Manual

1-2014 6. Optional Internet/Email Interface Descriptions
NOTICE
The generator set will exercise on the first scheduled day for which it is programmed. After that it
exercises on that day at the scheduled interval. For example, if the generator set is scheduled on
a Wednesday for Saturdays with a monthly interval, the generator set starts on the next available
Saturday. After that it exercises on Saturdays one month apart.
FIGURE 30. SET EXERCISE SCHEDULE
6.2.3 Load Control (Management)
Select the Load Control Tab on the Home Screen to enable Automatic or Manual Load Control.
In Automatic mode, the user can only view which loads are connected. In Manual mode, the
user can view loads and also connect or disconnect them. See Load Management for details.
FIGURE 31. GENSET LOAD MANAGEMENT
6.2.4 Event Log
Select the Event Log Tab on the Home Screen to review the last 20 events. See the Event Log
screen capture below for a list of all of the recordable events.
A029V089 (Issue 9) 53