Product Manual

2015 Cummins Power Generation Inc. All rights reserved. Specifications are subject to change without notice. Cummins Power
Generation and Cummins are registered trademarks of Cummins Inc. “Our energy working for you.” is a trademark of Cummins Power
Generation. Other company, product, or service names may be trademarks or service marks of others.
NAAC-6051a-EN (2/15)
Specification sheet
Load Management Kit
Description
Features
The Load Management Kit is used with the Air
Cooled Residential generator sets (GSBA/B/C).
This kit will allow the generator set to shed
electrical loads when the demand becomes too
high. Disconnected loads can be reconnected
when generator set capacity is available. The
module contains 2 contactors that can handle
50A load each. Knockouts are located on all
sides of the box for easy wire routing. The box
can be surface or flush mounted.
UL listed
Clear labeling for easy installation
Specifications
Relay
Number per modules – 2x2 pole (normally
closed)
Load amps – 50A
Load voltage
– 120VAC or 240VAC
Coil voltage – 12 VDC
Connections – Mechanical lugs, #14 - #4 AWG
copper or aluminum range
Box
Material – Steel, painted ANSI light gray
Rated – NEMA 1 (indoor use)
Mounting – Surface or flush

Summary of content (2 pages)