Product Manual

4. Installation 2-2017

No. Description No. Description

1 Day Tank (Sub-Base) 7 Fill Pipe

2 Engine Fuel Pump 8 Main Fuel Tank

3 Supply Line 9 Supply Line

4 Float Switch 10 Overflow Line

5 Return Line 11 120 Mesh Fuel Strainer

6 Vent Pipe 12 Fuel Transfer Pump Electric Motor

Driven

FIGURE 6. TYPICAL FUEL SUPPLY INSTALLATION (USING FACTORY SUB-BASE

TANK AS DAY TANK)

Engine Fuel Connections

Identification tags are attached to the fuel supply line and fuel return line

connections. All models require a fuel return line from the injectors to the tank.

Supply Tank

Locate the fuel tank as close as possible to the generator set and within the

restriction limitations of the fuel pump.

Install a fuel tank that has sufficient capacity to supply the generator set operating

continuously at full rated load for the planned period of operation or power outage.