Product Manual

4. Installation 2-2017

NOTICE

Only personnel knowledgeable of batteries and required precautions should

perform or supervise battery servicing.

NOTICE

See the Important Safety Instructions section for complete battery-related

safety information.

The generator set requires a 12V battery (negatively grounded) for engine cranking

and powering the electronic control system. When the generator set is running, the

battery is charged from the engine-driven battery alternator. When the set is not

running, an AC powered battery charger is needed to keep the battery charged.

As part of the installation, make sure that the battery is secured to the battery tray

with the strap provided.

To connect the battery:

1. Connect the positive battery terminal.

2. Connect the negative battery terminal.

3. Make sure that the black and red battery cable boots are in place.

Refer to the Model Specifications section for battery specifications.

An optional thermostatically controlled battery heater is available for more reliable

starting.

To prevent injury due to accidental startup:

• Do not connect the battery cables to the battery until the installation has been

completed;

• Make sure tools, rags, and body parts are kept away from any rotating parts or

electrically live parts; and

• Make sure it is time to start the generator set.