Installation manual

Natural Gas Generator Set Installation Manual-GF Series

Doc. 17855, Rel. 03/2014

3-11

3.15 Remote Radiator Cooling Require-

ments (Available on All Models)

The remote radiator cooling system substitutes a

remote mounted radiator and an electrically driven

fan in place of mounted components. Removal of the

radiator and the fan from the set reduces noise levels

without forcing dependence on a continuous cooling

water supply (necessary with heat exchanger cool-

ing). The remote radiator installation must be com-

pletely protected against freezing.

Remote radiator plumbing will vary with installation.

Follow recommendations given in Cummins Applica-

tion Manual T-030. See product Data Sheet provided

with the genset (visit www.cumminsnpower.com for

genset specifications) for friction head and static

head limits.

IMPORTANT: Before filling cooling system, check all

hardware for security. This includes hose clamps,

capscrews, fittings and connections. Use flexible

coolant lines with heat exchanger or remote mounted

radiator options.

1. Thimble

2. 3-Way Catalyst

3. Exhaust Line

4. Silencer

5. Condensation Drain Plug

6. Sweeping Elbow

7. Flexible Sections

8. Control Wiring

9. Power Wiring

10. Air Inlet

11. Level Concrete Base

12. Seismic Isolators (Optional)

13. Flexible Bellows

14. Air Outlet

Figure 3-6 Generator Set Installation (Typical)

NG-00041