User`s guide

View group (VIEW – Key 1)

This group allows the display of available data in different formats. As in the BASIC PAGE,

pressing Key 4 can conﬁgure each view. Boat speed can be displayed only if GPS or a speed

transducer is connected on the RS422 input.

Navigate with Key 1

*The boat speed input is optional and must be

set up separately. See the appendix for details.

BASIC PAGE

QUAD GAUGE

QUAD TEXT

BI TEXT

Pressing Keys 1-4 will change the engine parameter in the quadrant selected.

Press BACK when done.

Pressing Key 1 or 2 will select the parameter to be changed. Press Key 4

until the desired engine parameter is displayed. Press BACK when done.

Press Key 4

Pressing Keys 1-2 will change the engine parameter. Press BACK when done.

Press Key 4

Trip Group (TRIP – Key 2)

This group allows the display of data related to the current trip. TOTAL TRIP and STATISTICS

are not affected by turning the engine off. Data in these screens continues to accumulate

until cleared with the RESET key. NOTE: Using the RESET key on either the TOTAL TRIP or

STATISTICS screen will clear data from memory on both screens.

Navigate with Key 2

TOTAL TRIP

SPEED GRAPH*

STATISTICS

The graph represents the boat speed plotted against engine

speed. Press and hold Key 1 for one second which will clear

the graph. Press and hold Key 2 for one second which will

store the graph in non-volatile memory.

Press and hold Key 4 for one second which will

reset the trip data and statistics and will restart the

trip hours and fuel display data.

Press and hold Key 4 for one second to reset the trip data and

statistics and to restart the trip hours and fuel display data.

Press Key 4