Service manual

8. Optional Internet/Email Interface Setup 9-2013
FIGURE 52. NETWORK SETUP PAGE 2
FIGURE 53. NETWORK SETUP PAGE 3
2. Click Network Setup on the home page.
3. Click Click here to start Network Setup.
4. Click Off to turn off the generator set DHCP.
NOTICE
Skip step 5 is a unique IP address was already provided by the router.
5. In the IP Number field, enter a unique in-home network address for the generator set by
changing the field of IP address number to a number between 001 and 256 (one that is not
in use by another device on the same network).
6. The Subnet Mask, Static DNS #1 and #2, and Gateway numbers establish the
connections between the modem/router and the generator set and do not need to be
changed.
7. Press Next to continue to the e-mail setup screen.
8. Select the Alert Level to choose the type of e-mail message that the customer would like
to receive.
9. Enter the SMTP Port Number provided by your ISP or e-mail service provider.
10. Enter your e-mail Server Name.
NOTICE
An e-mail server name may be obtained from the customer's ISP or e-mail service
provider (example: smtp.cummins).
11. Enter the User Name and Password for the provided e-mail server.
76 A030A239 (Issue 10)