Specifications

33
Information for California Genset Users
These gensets meet the requirements of Californi-
a’s Exhaust Emissions Standards as stated on the
nameplate (Page 4).
As a California user of these gensets, please be
aware that unauthorized modifications or replace-
ment of fuel, exhaust, air intake, or speed control
system components that affect engine emissions
are prohibited. Unauthorized modification, removal
or replacement of the genset label is prohibited.
You should carefully review Operator (Owner),
Installation and other manuals and information you
receive with your genset. If you are unsure that the
installation, use, maintenance or service of your
genset is authorized, you should seek assistance
from an approved Onan dealer.
California genset users may use Table 5 as an aid in
locating information related to the California Air Re-
sources Board requirements for emissions control.
TABLE 5. EMISSIONS CONTROL INFORMATION
Genset Warranty Information
The California emissions control warranty statement is located in
the same packet of information as this manual when the genset is
shipped from the factory.
Engine Valve Clearance (Lash) See Specifications (Page 31).
Engine Fuel Requirements
The engine is certified to operate on diesel fuel. See FUEL REC-
OMMENDATIONS (Page 6).
Engine Lubricating Oil Requirements See ENGINE OIL RECOMMENDATIONS (Page 6).
Engine Adjustments
High Idle Speed. This is a service procedure requiring trained
personnel and proper tools. See the Service Manual.
Engine Emission Control System
The engine emission control system consists of engine design
and precision manufacture. (IFI)