Specifications

NOTE: The injection timing check is a measurement which
determines the injector push rod travel in relation to the
piston travel. Due to normal parts tolerances, it is necessary
to check one cylinder for each cam follower housing.
Timing Tool Installation
Caution: Pivot the dial indicator stems away from their
respective plunger rods before installing the timing fix-
ture to prevent damage to the indicators.
Install the piston plunger rod in the injector bore of the No.
1 cylinder.
NOTE: Make sure the plunger is centered and on top of the
piston.
Align the swivel bracket with the injector clamp capscrew
hole. Install the 6-inch swivel bracket capscrew. Tighten
the capscrew finger tight.
Position the push rod plunger rod near the push rod.
Tighten the swivel bracket capscrew enough to hold the
timing tool rigid. Make sure the piston plunger post is
clamped squarely to the cylinder head.
Injection Timing - General Information Engine Assembly (00-02)
N14Page 0-82