Specifications

Adjust the belt tension to the following values:
New Belt Tension Used Belt Tension
620 N [140 lbf] 490 N [110 lbf]
NOTE: A belt is considered used if it has been in operation
for more than 10 minutes.
If the belt will not maintain the correct tension, it must be
replaced.
Tighten the adjusting link capscrews to the following
torque values (Grade 5 or higher):
Bolt Size
Threads/
Inch N•m Ft-lb
5/16 18 20 [15]
7/16 14 34 [25]
1/2 13 68 [50]
Tighten the alternator to alternator support capscrew and
nut to the following torque values (Grade 5 or higher):
Bolt Size
Threads/
Inch N•m Ft-lb
3/8 16 41 [30]
7/16 20 88 [65]
1/2 13 108 [80]
Fan and Fan Spacer - Installation
Install the same number and thickness of fan spacers as
were removed during disassembly.
Install the fan. Tighten the 3/8-inch capscrews or hexa-
gon nuts.
Torque Value: 47 N•m [35 ft-lb]
Engine Assembly (00-02) Fan and Fan Spacer - Installation
N14 Page 0-143