Specifications

Measure the inside diameter of the new cam follower lever
roller bore.
Valve Lever Roller Bore I.D.
mm in
12.776 MIN 0.5030
12.801 MAX 0.5040
Injector Lever Roller Bore I.D.
mm in
19.151 MIN 0.7540
19.177 MAX 0.7550
Measure the outside diameter of the new cam follower
roller.
NOTE: The valve and the injector rollers are crowned. The
crowned roller must be measured in the middle of the roller
outside diameter.
Crowned Valve Roller O.D.
mm in
31.711 MIN 1.2485
31.762 MAX 1.2505
Crowned Injector Roller O.D.
mm in
41.237 MIN 1.6235
41.287 MAX 1.6255
Measure the outside diameter of the new roller pin.
Valve Roller Pin O.D.
mm in
12.692 MIN 0.4997
12.700 MAX 0.5000
Injector Roller Pin O.D.
mm in
19.063 MIN 0.7505
19.070 MAX 0.7508
Cam Follower Lever - Roller Replacement (04-03) Cam Follower Assembly
N14Page 4-14