Specifications

Exhaust Manifold Turbocharger
Mounting Stud - Replacement (11-02)
Apply penetrating oil to the base of the turbocharger
mounting stud to be removed.
Use a standard stud extractor to remove the turbocharger
mounting stud(s) from the center section.
Mounting Hole Threads - Inspection
Visually inspect for damaged threads in the turbocharger
mounting stud holes.
If threads are damaged (cross-threaded, etc.), chase the
threads with a 3/8-16 N.C.-38 tap.
Visually inspect the manifold sections for cracks or
damage.
NOTE: Install the shorter threaded end of the turbocharger
mounting stud in the exhaust manifold flange.
Apply a coat of anti-seize compound to the threads.
Install the studs in the mounting flange.
Use two mounting nuts locked together to tighten the
studs.
Torque Value: 40 N•m [30 ft-lb]
Exhaust System Exhaust Manifold Turbocharger Mounting Stud - Replacement (11-02)
N14 Page 11-5