Specifications

Mounting Adaptations - Service Tools
ST-1134
Dowel Pin Extractor
Use to pull dowel pins and crosshead guides.
ST-1232-1
(in Part No.
ST-1232)
Plate
Use in conjunction with drill and ream bushing sets to accurately
drill and ream holes in flywheel housings for the installation of
standard oversize dowel pins.
ST-1232-2
(in Part No.
ST-1232)
Spacer Washer
Use in conjunction with drill and ream bushing sets to accurately
drill and ream holes in flywheel housings for the installation of
standard oversize dowel pins.
3375052
(in Part No.
ST-1232)
Locator Pin
Use in conjunction with drill and ream bushing sets to accurately
drill and ream holes in flywheel housings for the installation of
standard oversize dowel pins.
3375432
Crack Detection Kit
This kit provides a convenient way to detect cracks in any engine
component.
3376495
Drill/Ream Bushing Set
Use to drill and ream holes in flywheel housing for the installation
of dowel pins.
Mounting Adaptations - Service Tools Mounting Adaptations
N14Page 16-2
The following special tools are recommended to perform procedures in Group 16. The use of these
tools is shown in the appropriate procedure. These tools can be purchased from your local Cummins
Authorized Repair Location.
Tool No. Tool Description Tool Illustration