Specifications

Engine Assembly - Specifications
Cylinder Liner Protrusion 0.10 MIN 0.004
0.18 MAX 0.007
Cylinder Liner to Lower Cylinder 0.05 MIN 0.002
Liner Bore Clearance 0.15 MAX 0.006
Cylinder Liner Out of Round 0.05 MAX 0.002
Crankshaft End Clearance 0.18 MIN 0.007
0.45 MAX 0.018
SAE No.
Flywheel Housing Bore I.D. 00 787.7 MAX 31.01
0 648.0 MAX 25.51
1/2 584.4 MAX 23.01
1 511.3 MAX 20.13
2 447.8 MAX 17.63
3 409.7 MAX 16.13
SAE No.
Flywheel Housing Bore Alignment T.I.R. 00 0.30 MAX 0.012
0 0.25 MAX 0.010
1/2 0.25 MAX 0.010
1 0.20 MAX 0.008
2 0.20 MAX 0.008
3 0.20 MAX 0.008
SAE No.
Flywheel Housing Face Alignment T.I.R. 00 0.30 MAX 0.012
0 0.25 MAX 0.010
1/2 0.25 MAX 0.010
1 0.20 MAX 0.008
2 0.20 MAX 0.008
3 0.20 MAX 0.008
Specifications Engine Assembly - Specifications
NT 855 Page 18-9
Part or Assembly Ref. Point mm in