Service Manual

ISB, ISBe and QSB (Common Rail [...] Lubricating Oil Cooler
Section 7 - Lubricating Oil System - Group 07 Page 7-7
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
WARNING
Coolant is toxic. Keep away from pets and children. If
not reused, dispose of in accordance with local
environmental regulations.
WARNING
Do not remove the pressure cap from a hot engine.
Wait until the coolant temperature is below 50°C
[120°F] before removing the pressure cap. Heated
coolant spray or steam can cause personal injury.
WARNING
To reduce the possibility of personal injury, avoid
direct contact of hot oil with your skin.
WARNING
Some state and federal agencies have determined
that used engine oil can be carcinogenic and cause
reproductive toxicity. Avoid inhalation of vapors,
ingestion, and prolonged contact with used engine
oil. If not reused, dispose of in accordance with local
environmental regulations.
CAUTION
Use caution when disconnecting or removing
lubricating oil lines and replacing filters that oil is not
spilled or drained into the bilge area. Do not drop or
throw filter elements into the bilge area. The oil and
oil filters must be discarded in accordance with local
environmental regulations.
Drain the engine coolant. Refer to Procedure 008-018.
Clean around the lubricating oil cooler cover.
Disconnect the turbocharger supply line. Refer to
Procedure 010-046.
Tag for location, and remove the lubricating oil lines for
the oil filter. Refer to Procedure 007-092.
Remove the belt guard in front of the alternator. Refer to
Procedure 008-001.
Release the belt tension on the alternator drive belt and
remove the alternator belt from the alternator pulley. Refer
to Procedure 008-002.
Remove the alternator. Refer to Procedure 013-001.
Remove
Remove the lubricating oil cooler housing capscrews,
housing, gaskets, and cooler element.