Service Manual

Lubricating Oil Dipstick Tube ISB, ISBe and QSB (Common Rail [...]
Page 7-12 Section 7 - Lubricating Oil System - Group 07
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Wipe off the dipstick, and install it in the dipstick tube
housing.
Fill the oil pan to the specified high oil level. The high oil
level can be found by looking up the oil pan option for the
engine serial number on QuickServe OnLine.
Remove the dipstick, and scribe an mark across the stick
at the oil level. Label the mark with an H to indicate the
high oil level.
Lubricating Oil Dipstick Tube
(007-011)
Preparatory Steps
Clean the area around the dipstick tube before removing
to prevent debris from entering the oil system.
Remove
Remove dipstick from the dipstick tube.
Remove dipstick tube from the cylinder block.
Service Tip: Use a dent puller and M8 x 1.25 x 21-mm
self-tapping capscrew. Thread the capscrew into the
dipstick tube, and remove the tube.