Service Manual

ISB, ISBe and QSB (Common Rail [...] Lubricating Oil Filter (Spin-On)
Section 7 - Lubricating Oil System - Group 07 Page 7-13
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install
Apply a thin bead of thread sealant around the bottom of
the knurled end of the tube.
Place knurled end of tube into the dipstick tube bore in the
cylinder block.
Use the dipstick tube installer tool, Part Number 3823875,
to install the dipstick tube into the cylinder block.
Lightly drive the dipstick tube until it seats against the
block casting.
NOTE: If a flexible tube is to be used, soak the end of the
nylon tube in hot water to help ease the installation.
Finishing Steps
Install dipstick into the dipstick tube.
Lubricating Oil Filter (Spin-On)
(007-013)
Remove
Clean the area around the lubricating oil filter head.
Use the oil filter wrench, Part Number 3400158, to remove
the filter.
Clean the sealing surface of the filter head.