Service Manual

ISB, ISBe and QSB (Common Rail [...] Lubricating Oil Filter Head (Remote Mounted)
Section 7 - Lubricating Oil System - Group 07 Page 7-15
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Lubricating Oil Filter Head (Remote
Mounted) (007-017)
Preparatory Steps
WARNING
To reduce the possibility of personal injury, avoid
direct contact of hot oil with your skin.
WARNING
Some state and federal agencies have determined
that used engine oil can be carcinogenic and cause
reproductive toxicity. Avoid inhalation of vapors,
ingestion, and prolonged contact with used engine
oil. If not reused, dispose of in accordance with local
environmental regulations.
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
CAUTION
Use caution when draining oil or replacing filters that
oil is not spilled or drained into the bilge area. The oil
and oil filters must be discarded in accordance with
local environmental regulations.
• Disconnect the battery. Refer to Procedure 013-009
• Remove the lubricating oil filter. Refer to Procedure
007-013
• Disconnect the lubricating oil lines to the filter head.
Refer to Procedure 007-092
• Verify and mark the oil lubricating hoses and the
adapter head for proper location.
Remove
Loosen, but do not remove, the inlet (1) and outlet (2)
lubricating oil filter head face seal connection locknuts.